Advertisement
Description
The Dan ML3 is a flashing lifejacket light which is activated manually.
The light is designed to be fitted by the lifejacket owner.
Daniamant A/S
Industrivej 24C
DK-3550, Slangerup, Denmark
Tel: +45 47 37 38 00 Fax: +45 47 37 38 09
Email: orders@daniamant.com
www.daniamant.com
www.daniamant.com
ML3 Instructions Issue 07 (D0000)
Dan ML3 lifejacket light
Installation and Maintenance Instructions
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Daniamant Dan ML3
Summary of Contents for Daniamant Dan ML3
- Page 1 Dan ML3 lifejacket light Installation and Maintenance Instructions Description The Dan ML3 is a flashing lifejacket light which is activated manually. The light is designed to be fitted by the lifejacket owner. Daniamant A/S Industrivej 24C DK-3550, Slangerup, Denmark Tel: +45 47 37 38 00 Fax: +45 47 37 38 09 Email: orders@daniamant.com...
- Page 2 Installation The ML3 is a Leisure and Inflatable Lifejacket version of the M3 Light. It is the responsibility of the lifejacket owner to ensure that the light is attached securely and is in the correct position on the lifejacket to provide maximum visibility when the wearer is in the water.
- Page 3 2. Press the on/off button for and the light will commence flashing, then press the button once more and the light should deactivate. Replacement The Dan ML3 lifejacket lights have a storage life of 5 years and must be replaced by the date shown on the label. Health and safety information Dan ML3 lights contain Lithium cells.
- Page 4 To ensure compliance with the WEEE and Battery Regulations, the Survivor Location Lights placed on the market in the UK or Denmark should be returned to Daniamant in the UK or Denmark, or deposited in your nearest WEEE Designated Collection Facility, operated by your Local Authority.
Need help?
Do you have a question about the Dan ML3 and is the answer not in the manual?
Questions and answers