Table of Contents
Advertisement
TUNING
The 2011 Crossbow IDS™ offers 2 settings for depower travel and turning impulse. This is
dependent on the attachment position of the rear bridle line and pulley.
Setting A (Factory Setting)
The factory setting provides the lightest turning impulse and also increased depower travel. This
setting uses both A towpoints on the wingtip.
Setting B
Moving the rear bridle line and also the pulley link to the B setting increases the turning impulse and
shortens the depower travel. This setting uses the B towpoints on the wingtip.
When moving the rear bridle from the A to B setting you must make sure to move both the rear
bridle line and pulley link in unison.
B
A
B
A
15
2011 CROSSBOW IDS™ KITE USER MANUAL
Advertisement
Table of Contents
