Torque Adjustment - Deprag 347-218U Operating Instruction Booklet

4.2. Torque Adjustment

For an external torque adjustment use the following steps:
1. Disconnect the screwdriver from air supply.
2. Insert the supplied hand screwdriver 326240 through the slot on the
motor housing into the half-round bore of the lock ring.
3. By turning the hand screwdriver 326240 clockwise (-), the torque is
reduced and by turning it counter-clockwise (+), the torque is increased.
Picture: Torque Adjustment
half-round bore for
hand screwdriver
15