This section indicates how to configure the Switch to enable its smart
functions including:
Port Setting (Speed/Disable, and Flow Control)
VLAN Setting (802.1Q VLAN)
Trunking
Port Mirroring
PoE Setting
System Setting
Device status and Statistic
Login
Before you configure this device, note that when the Web Smart
Switch is configured through an Ethernet connection, make sure the
manager PC is set on same the IP network. For example, when the
default network address of the default IP address of the Web Smart
Switch is 192.168.0.1, then the manager PC should be set at
192.168.0.x (where x is a number between 2 and 254), and the default
subnet mask is 255.255.255.0.
Open Internet Explorer 5.0 or above Web browser.
Enter the IP address http://192.168.0.1 (the factory-default IP address
setting) into the address location.
Figure 12.
27