Add A New Camera - D-Link DCS-G900 Install Manual

Wireless g internet camera

Hide thumbs Also See for DCS-G900:

Table of Contents

DCS-G900 Install Guide

To add a new camera select the Camera button

Make sure that the green lights are on when clicking the camera button.

A green light under the camera button

means that there is already a camera

connected.

Select the camera you would like to connect to and click Add A Camera. If the

camera is not listed in this list, click the Input IP Address button. Enter the IP

Address of the camera in the speciﬁed ﬁeld and click Add. If the IP Address

is entered incorrectly or if you have a bad network connection, a dialog box will

appear to notify you of the error. To add cameras in IPView SE, check that you

have your network conﬁgured correctly. To add a remote camera, you need

to have Internet access.

D-Link Systems, Inc.

Add a New Camera

from the IPView SE.

Table of Contents