Wireless Security Setup Wizard - D-Link GamerLounge DGL-3420 Manual

Wireless Security Setup Wizard

The Wireless Security Setup Wizard will assist you with setting up your wireless network.The step by
step guide will ask you for the necessary information to secure your wireless network. The Wireless
Security Setup Wizard guides you through the following steps:
To begin, click on the Launch Wireless Security Setup Wizard button.
 The Welcome To The D-Link Wireless Security Setup Wizard screen appears, click Next to
continue.
 Step 1: Choose Ad-Hoc Mode or Infrastructure Mode prompts you to select the type of network
you will be using. Ad-Hoc mode is Peer-to-Peer networking where devices communicate directly
without a router. Infrastructure mode is a network that includes a router.
 Step 2: Choose 802.11a or 802.11g for your wireless network prompts you to select the
wireless band that you will be communicating with in your network. All the devices on the network
must share the same wireless band.
 Step 3: Name Your Wireless Network prompts you to select a wireless name. You must select
a name so that other devices on the network will recognize the network. It is advised that you
change the name from the pre-configured name of default. Click on Site Survey for a list of
available networks and their names.
12
Using the Configuration Interface
D-Link Systems, Inc.