Mode Of Operation; Icon Functions - Daikin 910193093 Installation And Operation Manual

I3 series auto changeover

Table of Contents

The thermostat is a programmable, manual or auto changeover, up to 3-stage heat (depending on your model) and up to

3-stage cool (depending on your model) thermostat. It functions with air conditioning, heat pumps, gas, oil, or electric heat

systems. The thermostat activates the heating appliance when the room temperature is below the set heat temperature (by the

differential temperature). When the call for heat has been satisfied, the outputs are turned off. With heat pumps, the thermostat

will not let the compressor come on for 4 minutes after it turns off to protect your compressor.

When the room temperature is greater than the set cool temperature (by the differential temperature), the cooling device is

activated. When the call for cooling has been satisfied, the outputs are turned off. The thermostat will not let the compressor

come on for 4 minutes after it turns off to protect your compressor.

The program schedule can be overridden by changing the set temperature (

temporary hold. To remove the temporary hold, press

UP – Used to increase the time, set temperatures, and to adjust configuration settings.

DOWN – Used to decrease the time, set temperatures, and to adjust configuration settings.

MENU – Used to enter configuration, set the clock, lock the thermostat, or select viewing options.

CONFIG

Sets up thermostat to work for specific systems.

CLOCK

Set year, month, date, and time.

LOCK

Allows you to lock the thermostat to prevent tampering.

VIEW

Allows you to see the remote sensor temperatures, date, current schedule period, lock screen, filter

accumulated time, and show details (system status).

HUMIDITY

(910193129 model only) Allows you to view the current relative humidity and change humidity setpoint (10% to 80%).

FAN – Used to select between AUTO, ON, and HOURLY fan operation.

MODE – Used to select between OFF, HEAT, COOL, and AUTO changeover modes.

HOME – Wakes thermostat, returns to home screen, and enters changes into memory.

SCHEDULE – Used to edit program schedule, turn program on and off, and set vacation return dates.

ALARM – The water source heat pump Microtech III unit alarm will be displayed notifying the occupant that

service may be required.