To change the lock code, do the following:
1. Press
, then press
2. Enter the current lock codes. To find the current lock codes, follow the instructions under "Configuration and Thermostat
Lock".
3. Press
to enter new lock codes.
4. Enter new lock codes.
5. Press
. The Lock Codes have been updated.
Note: Upon subsequent power ups, new lock codes will display.
The configuration mode is used to set the thermostat to match your heating/cooling system. The thermostat functions with heat
pump, air conditioning, gas, oil, or electric heat systems. To configure the thermostat, perform the following steps:
Press
, then press
Press
to advance from one screen to the next.
Note: Pressing
or
Press the
to change settings within each screen. Changes are saved automatically.
To exit configuration mode, press
Changing the Lock Code
until Lock menu displays.
Configuration Mode
repeatedly until
will return you to the previous screen.
. Auto exit occurs after two minutes with no icons touched.
is selected.
13