Table of Contents
Advertisement
Connecting cables
After assembling your monitor, you must connect cables correctly to use the monitor and
computer. Your monitor can be used with either the Tiny installed in the monitor or an external
desktop/laptop computer. To connect cables, do one of the following:
1.
If you use the Tiny installed in the monitor, connect the ac power adapter cable and power
cord that comes with the monitor. First connect the ac power adapter cable to the ac power
adapter connector on the monitor.Then, connect one end of the power cord to the ac power
adapter and the other end to a properly-grounded electrical outlet.
Note: When installing the computer to the TIO monitor for AIO mode, ensure you use
the power adapter that comes with the computer when computer power adapter large
than 90W, otherwise please use TIO power adapter.
2.
Use a DisplayPort cable of this type as shown. Connect one end of the DisplayPort cable
to the DisplayPort connector on the monitor and the other end to a DisplayPort connector
on the computer. To locate the DisplayPort connector on the monitor, see
M90n-1 supported MTs list:"on page 1-4.
"*ThinkCentre
1-10
Chapter 1.
Hide quick links:
Advertisement
Table of Contents
