D-Link DCS-6620G Install Manual page 14

Camera Configuration (continued)
After you click the button labeled
Link to Devices(s)
Wizard will automatically open your
Internet browser to the IP Address of
the DCS-6620G, in this example it is:
http://192.168.0.120. Your
may have a different IP Address.
Click on Configuration to set up your
wireless settings for the DCS-6620G
to be consistent with your network.
Leave the box titled This camera can be found by installer whenever it starts
up, unchecked to avoid running this install application each time you boot up the
DCS-6620G. Check this box if you need to change the IP Address next time the
DCS-6620G boots up.
If you have a DHCP server on your
network, you will already have a
valid IP Address in these fields.
If you will be using the DCS-6620G
in a wireless network, the following
page explains the importance of
each field and what is required for
you to be able to connect to your
wireless network.
If you do not have a DHCP server
on your network, fill out your IP
Address, Subnet mask, Gateway
and at least one DNS IP Address
respectively on this page. If you
do not know what to put in these
fields, please contact your System
Administrator or your Internet Service
Provider.
Click Apply
14
, the Installation
DSC-6620G
DCS-6620G Install Guide
D-Link Systems, Inc.