Getting Started; Battery Installation; Battery Notice - VTech Toot-Toot Friends Cruise & Go Convertible User Manual

GETTING STARTED

BATTERY INSTALLATION

1. Make sure the unit is OFF.
2. Locate the battery cover on the bottom of
the unit. Use a screwdriver to loosen the
screws.
3. Install 2 new AAA size (LR03/AM-4)
batteries following the diagram inside
the battery box. (The use of new alkaline
batteries is recommended for maximum
performance.)
4. Replace the battery cover and tighten the
screws to secure.
IMPORTANT
This product is in a try-me mode in the packaging. To activate normal
play mode, please complete the following steps:
1. Slide the ON/OFF SWITCH to the OFF ( ) position
2. Press and hold the LIGHT-UP BUTTON for 2 seconds.
3. Slide the ON/OFF SWITCH to the ON ( ) position to activate normal
play mode.

BATTERY NOTICE

• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
3