Temperature Selection; Interior Light; Leveling Instructions - Danby DPF073C1WDB Owner's Manual

Partial frost free refrigerator
Hide thumbs Also See for DPF073C1WDB:
Table of Contents

Advertisement

Available languages

Available languages

OPERATING INSTRUCTIONS

TEMPERATURE SELECTION

The thermostat dial on the right hand side of the
refrigerator compartment is numbered from 1 to 7.
1 is the warmest setting and 7 is the coldest setting.
The recommended setting of 4 should be suffi cient
for regular home use. To stop all cooling, turn the
dial to "OFF".
This dial controls the temperature for both the
refrigerator and freezer compartments. If the
refrigerator compartment is not reaching cold
enough temperatures, ensure that the vent in the
freezer compartment is open to allow the passage
of cold air from the freezer to the refrigerator
compartment.

INTERIOR LIGHT

If the interior light burns out, the light bulb can be
replaced by following the steps below. Ensure that
the appliance is unplugged before replacing the
light bulb.
1. Remove the screw from the light bulb cover.
2. Squeeze the tabs at the top and bottom of the
light bulb cover and pull outward.
3. Unscrew the light bulb and discard. Ensure
that the light bulb is cool before attempting to
remove to avoid burns.
4. Replace the light bulb with a standard 10 watt
appliance light bulb.
5. Replace the light bulb cover and the securing
screw.

LEVELING INSTRUCTIONS

There are two adjustable feet on the bottom of the
appliance that can be turned up or down to ensure
that the appliance is level.
1. Turn the leveling feet counter-clockwise as far as
they will go, until the top of the foot is touching
the bottom of the chassis.
2. Slowly turn the leveling legs clockwise until the
appliance is level.
4
1
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dpf073c1bdb

Table of Contents