Setting The Display Brightness; Changing The Input Source; Playing The Radio - capello CR60 User Manual

Snooze
1. When alarm sounds, pressing the SNOOZE / BRIGHTNESS button will temporarily
silence the alarm. The alarm will sound again after approximately 10 minutes.
2. To extend the snooze duration, repeatedly press the SNOOZE / BRIGHTNESS
button to cycle through and select one of the snooze presets.
Notes: Once the snooze function has been activated, press the SNOOZE /
BRIGHTNESS button anytime and the display will show the remaining time.
Repeatedly press the SNOOZE / BRIGHTNESS button to adjust or modify the current
snooze time setting.

Setting the display brightness

There are three levels of display brightness available (the default setting is high).
Press the SNOOZE / BRIGHTNESS button to cycle through and select the desired
setting.
Note: Make sure that the unit is not in alarm sound status.

Changing the input source

With the CR60 powered "ON", repeatedly press the SOURCE button to change the
input source to cycle between FM Radio and Bluetooth.

Playing the radio

1. With the CR60 plugged in and powered "ON", repeatedly press the SOURCE
button until FM Radio indicator lights up on the display.
2. Repeatedly press the TUNE UP / MIN or TUNE DOWN / HOUR button to manually
adjust the tuning on the display until the desired station appears.
3. For auto tuning, press and hold the TUNE UP / MIN or TUNE DOWN / HOUR
button until the display starts to scan, then release the button. The tuner will
search and stop on the next strongest station it finds. Repeat this process until the