Important Safety Instructions Warning - Energizer ENX8K User Manual

30,000mwh lithium-polymer car jump starter
Table of Contents

Advertisement

Disconnect the Jump starter within 30 seconds after starting your car.
1.
Do not connect the red clamp and black clamp directly.
2.
Do not disassemble the machine.
3.
IMPORTANT SAFETY INSTRUCTIONS WARNING –
When using this product, basic precautions should always be followed,
including the following:
a) Read all the instructions prior to using the product.
b) To reduce the risk of injury, close supervision is necessary when the
product is used near children.
c) Do not put fingers or hands into the product.
d) Use of an attachment not recommended or sold by jump starter
manufacturer may result in a risk of fire, electric shock, or injury to
persons.
e) To reduce risk of damage to the electric plug and cord, pull the plug
rather than the cord when disconnecting the jump starter.
f) Do not use a battery pack or appliance that is damaged or modified.
Damaged or modified batteries may exhibit unpredictable behavior
resulting in fire, explosion or risk of injury.
h) Do not operate the jump starter with a damaged cord or plug, or a
damaged output cable.
i) Do not disassemble the jump starter, take it to a qualified service
person when service or repair is required. Incorrect reassembly may
result in a risk of fire or electric shock.
j) To reduce the risk of electric shock, unplug the jump starter form the
outlet before attempting any instructed servicing.
k) WARNING - RISK OF EXPLOSIVE GASES.
1) Working in vicinity of a lead acid battery is dangerous. Batteries
generate explosive gases during normal battery operation. For this
reason, it is of the utmost importance that you follow the instructions
each time you use the jump starter.
2) To reduce risk of battery explosion, follow these instructions and

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents