INTRODUCTION Please read this manual thoroughly before installing and operating your new Energizer® Lithium-Polymer Car Jump Starter. This manual contains information you need to obtain relating to the performance required for your application. Keep this manual for future reference. IMPORTANT SAFETY INFORMATION...
Page 3
SPECIFICATIONS (Specifications are subject to change without notice.) Battery Capacity: 30,000mWh Starting Current: 200A Peak Current: 500A DC Charge Input: 5V 1A/2.1A Rated USB Output: 5V/max, 2.4A (iPad) Temp (Environment): -25°C to 40°C / -13°F to 104°F Physical Specifications: Dimensions (L x W x H): 5.5in x 3.2in x 0.8in / 140mm x 83mm x 20mm Weight: 0.65 lbs / 0.29 Kg...
SAFETY INFORMATION Please read this entire manual before attempting to use this product. WARNING Avoid dangerous environments. Do not charge this item in rain, snow, damp or wet environments. Do not use this item or charger in the presence of explosive atmospheres (gaseous fumes, dust or flammable materials) since sparks may be generated when inserting or removing this item, possibly causing fire.
Page 5
OPERATING INSTRUCTIONS Make sure power level is above 50% before use: Indicator Battery charger 100% Plug the blue connector into the 12V Jump Starter port (A); LED (B) illuminates red. Connect the red damp to positive '+' on the vehicle's battery. Connect the black clamp to negative '-' on the vehicles battery.
TROUBLE SHOOTING Possible Cause Problem Solution Jump starter does not 1. Battery may not 1. Charge the jump starter jump start vehicle. have sufficient to sufficient charge. Red blinking charge. 2. Reconnect the clamps 2. Jumper cable clamps to the proper battery maybe improperly terminals, and ensure the jumper cable’s LED...
Disconnect the Jump starter within 30 seconds after starting your car. Do not connect the red clamp and black clamp directly. Do not disassemble the machine. IMPORTANT SAFETY INSTRUCTIONS WARNING – When using this product, basic precautions should always be followed, including the following: a) Read all the instructions prior to using the product.
those published by battery manufacturer and manufacturer of any equipment you intend to use in vicinity of the battery. Review cautionary marking on these products and on engine. l) PERSONAL PRECAUTIONS 1) Consider having someone close enough by to come to your aid when you work near a lead-acid battery.
Page 9
D- USB 2.4A output suitable for most USB devices including smart phones, tablets, iPhone, iPad, and iPod E- On/off button _ Led Light button F- DC charge input G- Battery level indicator lights Your Energizer Jump Starter can be charged with any USB charging device.
WARRANTY AND RETURNS What does the warranty cover? This Limited Warranty is provided by Bright Manufacturing and covers defects in workmanship and materials in your model ENX8KK Jump Starter. This warranty period lasts 12 months from date of purchase at the point of sale to you, the original end user customer.
Page 11
Bright Manufacturing product specifications including high input voltage from generators or lighting strikes; 3. The product if repairs have been done to it other than by the Energizer Warranty Department. 4. The product if it is used as a component part of a product expressly warranted by another manufacturer;...