Setting up and using the accessibility features
Setting up and using the accessibility features
Enabling Magnification mode
1
From the control panel, press and hold the 5 key until you hear a voice message.
2
Select Magnification mode.
3
Select OK.
For more information on navigating a magnified screen, see
page
25.
Activating Voice Guidance
From the control panel
1
Press and hold the 5 key until you hear a voice message.
2
Select OK.
From the keyboard
1
Press and hold the 5 key until you hear a voice message.
2
Press Tab to navigate the focus cursor to the OK button, and then press Enter.
Notes:
•
Voice Guidance is also activated when you insert headphones into the headphone jack.
•
To adjust the volume, use the volume buttons at the bottom part of the control panel.
Adjusting the Voice Guidance speech rate
1
From the home screen, select Settings > Device > Accessibility > Speech Rate.
2
Select the speech rate.
Adjusting the default internal speaker volume
1
From the control panel, navigate to:
Settings > Device > Preferences > Audio Feedback
2
Adjust the volume.
Notes:
•
If Quiet Mode is enabled, then audible alerts are turned off. This setting also slows the printer
performance.
"Navigating the screen using gestures" on
24