Troubleshooting
3
Read the warning message, and then select Continue.
4
Press and hold X and # simultaneously for 15 seconds to clear the message.
Note: If you are unable to reset the supply usage counters, then return the item to the place of
purchase.
Scanner maintenance required, use ADF Kit
The printer is scheduled for maintenance. For more information, go to
contact your service representative, and then report the message.
Paper feed problems
Envelope seals when printing
Action
Step 1
a
Use an envelope that has been stored in a dry environment.
Note: Printing on envelopes with high moisture content can
seal the flaps.
b
Send the print job.
Does the envelope seal when printing?
Step 2
a
Make sure that paper type is set to Envelope.
From the control panel, navigate to:
Settings > Paper > Tray Configuration > Paper Size/Type
b
Send the print job.
Does the envelope seal when printing?
Collated printing does not work
Action
Step 1
a
From the control panel, navigate to:
Settings > Print > Layout > Collate
b
Touch On [1,2,1,2,1,2].
c
Print the document.
Is the document collated correctly?
http://support.lexmark.com
Yes
No
Go to step 2.
The problem is
solved.
Contact
customer
The problem is
support.
solved.
Yes
No
The problem is
Go to step 2.
solved.
228
or