Controls; How To Use - Vornado SRTH Owner's Manual

CONTROLS

POWER INDICATOR LIGHT
The amber light illuminates
around control dial to indicate
heater is On.
TIMER
8 English
POWER
On (I or II)
Off (O)
MODE
High Heat (II) 900 watts,
Low Heat (I) 450 watts or Fan Only

HOW TO USE

Before use, check appliance for visible damage. DO NOT USE THIS HEATER if there is evidence of damage. If any damage is found, contact
Vornado Air LLC at 1-800-234-0604.
1. Use integrated handle on back
of heater for lifting and carrying.
2. Position heater so airflow is
not obstructed.
3. Plug power cord into standard
grounded wall outlet.
4. Select Mode by turning control
dial. In Fan Only position, fan
will run continuously. Press to
set timer for 4 hours. LED light
illuminates when Timer is set.
English
9