Samsung HW-M4501 User Manual page 26

Hide thumbs Also See for HW-M4501:
Table of Contents

Advertisement

2. Mark the location where the screws will go
through on the wall, and then remove the
Wall Mount Guide. Next, drill holes for the
screws using an appropriately sized drill bit.
Center Line
Center Line
3. Fasten the 2 Bracket-Wall pieces firmly to
the wall at the marked locations using the
appropriate screws.
4. Attach the Soundbar to the 2 Bracket-Wall
pieces as shown in the illustration.
5. Insert a Holder-fix Mount into each hole on
the product's bottom side. Tighten each
Holder-fix Mount to fix the Soundbar to the
2 Bracket-Wall pieces.
• Do not hang onto the installed unit and avoid
striking or dropping the unit.
• Secure the unit firmly to the wall so that it
does not fall off. If the unit falls off, it may
cause an injury or damage the product.
• When the unit is installed on a wall, please
make sure that children do not pull any of the
connecting cables, as this may cause it to fall.
• For the optimal performance of a wall mount
installation, install the speaker system at
least 5 cm below the TV, if the TV is mounted
on the wall.
• For your safety, if you do not mount the unit
on the wall, install it on a secure, flat surface
where it is unlikely to fall.
ENG - 22

Advertisement

Table of Contents
loading

Table of Contents