Connecting Using An Optical Cable - Samsung HW-M4501 User Manual

• If "tV arC" does not appear in the display window of the Soundbar main unit, confirm that the
cable is connected to the correct port.
• Use the volume buttons on the TV's remote control to change the volume on the Soundbar.

Connecting using an optical Cable

1. Connect the oPtICaL In (Audio) jack on the Soundbar to the OPTICAL OUT jack of the TV with a
digital optical cable (not supplied).
2. Press the (Source) button on the top panel or remote control, and then select the "D.In" mode.
• When the Soundbar is connected to a Samsung smart TV released in 2017 or later, the
Bluetooth POWER function automatically turns on to enable the Soundbar to be controlled with
the TV remote control. (See page 19 for details on Bluetooth POWER.)
auto Power Link
Auto Power Link automatically turns on the Soundbar when the TV is turned on.
1. Connect the Soundbar and a TV with a digital optical cable (not supplied).
2. Press the
(Source) button on the top panel or on the remote control, and then select "D.In".
optical Cable
(not supplied)
OPTICAL OUT
top of the Soundbar

D.In
ENG - 9
Bottom of the Soundbar

AUX IN
OPTICAL IN