Thank you for choosing the Pasadena Edition Massage Chair to complement your lifestyle and comfort needs. Carefully and thoroughly read this manual before using this product to ensure proper operation. We recommend keeping this manual for regular review and future reference. This Owner’s Manual should be kept on hand for easy reference.
Safety Precautions Carefully and thoroughly read this manual before using this product. The Owner’s Manual should be kept in an easily accessible place for future reference. Please pay special attention to all “caution” and “warning” symbols and labels throughout this manual and on the massage chair.
Page 4
o If you become uncomfortable at any time when using the massage chair, stop using the chair immediately. o Only use the massage chair when it is placed on a level floor. o When operating the massage chair, make sure the switches are operational with reference to their intended functions.
Page 5
Do not use the massage chair when your hands or body is wet as it can result in electric shock and personal injury. Do not spill water or other liquid onto the massage chair. Do not place massage chair in a humid environment such as a bathroom. Placing the massage chair in a humid environment can result in electric shock and personal injury.
Page 6
o When the massage chair is in use, do not place your fingers into the gap between the housing and cushion of the massage chair as this can result in physical injury. o Do not use the massage chair to massage the head or stomach as this can result in nausea and/or physical injury.
Page 7
o Do not rip, tear, or cut the massage chair fabric cover. This can result in personal injury and malfunction of the massage chair. o Do not bend, twist, or stretch the power cord as this could result in electric shock and/or fire.
o Do not use the massage chair near any open flames or flammable gas. This can result in a possible fire, personal injury, or malfunction and damage of the massage chair. o Do not use the massage chair near areas where aerosol spray products are used as this can damage the massage chair.
Functions: As a therapeutic massage device for home use, the massage chair provides such benefits as relaxing the muscles, relieving the body from minor muscle aches and pains, and helpful in improving sleep. Components and Descriptions...
Page 10
1. ON/OFF: When the ON/OFF button is pressed, the massage chair will enter standby mode. If the ON/OFF button is pressed again, the rollers will return back to their initial position. Please note that when the power is ON, the red LED light is illuminated. When the power is OFF, the red LED light will turn off.
o Do not splash water or any other liquid onto the massage chair or controller. o Do not operate the massage chair with wet hands. o To not sit, drop, or tamper/dismantle the controller. Do not pull excessively on the controller wire.
Page 12
o Do not use the massage chair in the bathroom or any other humid environment. o Make sure the massage chair is assembled and operated on a flat level, non-slippery floor. o Do not use the massage chair in dusty and high ambient temperature environments.
Page 13
How to Move – When moving the massage chair, make sure the main power switch is in the OFF position and the massage chair cord is unplugged from the wall receptacle. When moving the massage chair using When lifting and moving the massage chair, the caster wheels, straighten the massage lay the back of the massage chair flat into chair to the upright position and grab hold...
Page 14
How to Connect the Power Source 1. Connect the massage chair power 2. Turn the main power switch ON at the cord to the lower right front of the lower right front of the massage chair. massage chair and plug the other end into the wall receptacle.
Confirm the Material Before using the massage chair, make sure the massage chair leather and other massage chair coverings are not damaged. Unzip the zipper and put your hand/finger into the gap between the chair back and the back cushion to check whether the fabric material is broken or damaged.
Page 16
o Once you have raised the footrest using the controller, do not sit in the massage chair. You must only sit in the massage chair once the footrest is lowered. o Before entering the massage chair, make sure the massage chair is in the upright position.
Page 17
You can adjust the angle of the massage chair by pressing the corresponding button on the controller. If you hold the button for over 3 seconds and then let go with the indicator light flashing, the massage chair will adjust to your position preference until the button or reverse button is pressed again.
Starting The Massage Chair Massage Selections (AUTO) The preset programs make it easy to select a function that suits your preferences. Once you have chosen the desired function, the massage chair will enter the body scanning mode. This selection is recommended for users who are melancholy or who feel a lack of energy.
Page 19
Select Function A. Auto Program Select one of the buttons in the AUTO program. There are 3 programs available to help relieve fatigue. B. Manual Program Select one of the buttons in the MANUAL program. You can also combine a roller massage and an air massage.
Page 20
How To Use A. Under the AUTO selection, you can select one of the AUTO programs. During the operation, you can switch to either of the 3 AUTO programs. B. You can adjust the backrest to move upward or downward. During the massage, you can stop the massage operation by pressing the ON/OFF button.
Page 21
o If the strength of the massage chair is too great, reduce the strength according the guidance of the Owner Manual instructions. If you are not able to reduce the strength, stop using the massage chair and contact the dealer for assistance. Continued use can result in personal injury.
Page 22
C. Roller Massage By pressing the specific Roller button, you can adjust the roller massage function. By pressing this button, the roller massage will switch to whole-body and partial- body. By pressing this button, the roller massage strength will switch from Soft (“S”), Medium (“M”), and Strong (“W”).
Troubleshooting If you encounter any issues with the operation of the massage chair, please refer to the troubleshooting guidelines below. If you are not able to resolve the issue, stop using the massage chair immediately and contact your dealer. Make sure to unplug the massage chair cord from the wall outlet.
Problem – There is a flash of the power light on the controller. Solution – Turn OFF the Main Power Switch and wait 10 seconds. Then turn the Main Power Switch back ON. If the massage chair is experiencing any of the following, stop operating the massage chair and contact your dealer: ...
When cleaning the massage chair cover, do so with lukewarm water and a soft cloth. You can use a very small amount of upholstery cleaner (mild cleaner) if necessary. When using an upholstery cleaner, test a spot on the massage chair that is out-of-sight to make sure the cleaner does not stain the massage chair cover.
Height Armrest Approx. 42.5” Height Approx. 24.4” Width Approx. 28.0” Depth Approx. 40.2” Headrest Height Height Approx. 23.6” Approx. 15.8” Depth Approx. 61.0” Warranty 3 Year Limited Warranty The massage chair is covered by a 3 Year Limited Warranty. During the first 3 years of ownership, the massage chair is covered with in-home service including parts and labor.
Page 27
the Plan to include parts and labor. If parts are not available, and thus the product is irreparable, you either will receive a replacement with a comparable feature model of like and quality or be reimbursed an amount equal to the average repair cost not to exceed the current replacement value of the product.
WARRANTY CARD Congratulations on your purchase of an Infrared Sauna from Golden Designs, Inc. Please take the time to complete the following Warranty Card and mail it back to: Golden Designs, Inc. 3550 Jurupa Street, Unit B Ontario, CA 91761 Please include a copy of your sales receipt showing date of purchase as this will serve as proof of purchase.
Need help?
Do you have a question about the LC5000 and is the answer not in the manual?
Questions and answers