Program Function; Mute Function; Timer Function - Curtis KCR2606 Instruction Manual

PROGRAM FUNCTION

The Program feature can be used to program up to 20 tracks to play in a selected order.
1. While in the stop mode only (CD is not playing), press the CD PROGRAM "PROG/MEM"
Button, LCD Display will show the wording "PROG 01" and "PROG 01" starts to flash.
2. Press the SKIP+/TUN+ BUTTON or SKIP–/TUN– Button to allocate the desired track.
3. Press the CD PROGRAM BUTTON to select and store the track into memory.
4. Repeat step 2 to 3 to select up to 20 tracks.
5. To play the selected tracks (in the program mode); press the CD PLAY/PAUSE BUTTON.
The track number and the "PROG" appear on LCD Display.
6. Press the SKIP-/TUN- Button to hear the previous or press the SKIP+/TUN+ Button
buttons to hear next program track.
Note: After all of the programmed tracks have played, the CD player will return to the
stop mode.
7. To clear the programmed tracks from memory, press STOP two times.
SLEEP FUNCTON
1. Press the FUNCTION BUTTON to the desired source.
2. Tune in the desired radio station or CD and adjust the volume control.
3. Press the SLEEP BUTTON. The "120" will appear on the clock display.
4. Repeatedly press the SLEEP BUTTON for desired sleep time between 10-120 minutes.
5. The unit will automatically switch off when the SLEEP time expires.

MUTE FUNCTION

When you press the MUTE BUTTON, the volume will turn off. You will not hear any sound.
When you press the MUTE BUTTON again, volume will turn on again.

TIMER FUNCTION

1. Press the TIMER BUTTON
2. Press the SKIP+/TUN+ to set the DESIRED HOUR.
3. Press the SKIP–/TUN– to set DESIRED MINUTE.
4. The unit will automatically sound 'buzz' when the time expires.
Specifications :
Power Supplies : AC 120V 60Hz
Frequency AM 530 – 1700 KHz
FM 88 – 108 MHz
11