Troubleshooting Guide - Curtis iMode iP1500 Owner's Manual

TROUBLESHOOTING GUIDE

PROBLEM
No sound is heard.
No sound is heard.
All or part of the CD
will not play.
POSSIBLE CAUSE
GENERAL
Power is not on.
VOLUME Control is set
to minimum.
Mute is on.
RADIO
Station has not been
tuned properly.
FM reception is weak.
Wrong function is
selected.
CD
CD is inserted
incorrectly.
CD is scratched.
CD is dirty
CD is warped
Condensation has formed
inside your CD player.
Function swtich is not
set to CD.
CD compartment not
closed
14
SOLUTION
Press the POWER button.
Adjust the VOLUME
Control.
Press Mute on remote.
Tune station properly .
Extend the FM cord.
Press the FUNCTION
button to the radio
position.
Make sure that the CD is
placed in the tray with the
label side up.
Try another CD.
Clean the CD with
soft cloth
Try another CD.
Remove the CD and leave
the CD tray open for about
one hour to let the CD player
dry out.
Set Function switch to CD
Close CD compartment
door.