Pioneer AVH-X1700S/XNUC Service Manual page 59

5
Removing the Service Unit (Keyboard) (Fig.3)
Remove the Holder(1).
1
Release the seven latches and then remove
the Holder(2).
Remove the Service Unit (Keyboard).
Note:
With this model, the Cushion of Touch
Panel was attached using a jig in the
factory line.
Removing the DVD Mechanism Module (Fig.4)
1
Remove the four screws.
2
Disconnect the connector and then remove
the DVD Mechanism Module.
DVD Mechanism Module
Bracket
Attention at assembly:
When installing the DVD Mechanism Module,
pulling the Bracket to the DVD Mechanism
Module, tighten the screws.
Put the dowels of the DVD Mechanism
Module in the slits of the Bracket securely.
Attention of removing
Don't remove this screws excluding the
dismantlement of the DVD Mechanism
Module.
5
6
1
1
1
Holder(2)
DVD Mechanism Module
1
1
AVH-X1700S/XNUC
6
7
Holder(1) Service Unit (Keyboard)
1 1
1
2
7
8
A
1
1
B
Fig.3
C
D
1
E
Fig.4
F
59
8