Makita PLM5113N Instruction Manual page 9

• Stop the engine and disconnect the spark plug wire,
make sure that all moving parts have come to a
complete stop and, where a key is fitted remove the
key:
- whenever you leave the lawn mower;
- before refueling.
• Reduce the throttle setting during engine shut down
and, if the engine is provided with a shut-off valve, turn
the fuel off at the conclusion of mowing.
• Only use the lawn mower for the purpose for which it is
designed, for cutting and collecting grass. Any other
use can be hazardous, causing damage to the
machine.
Maintenance and storage
• Keep all nuts, bolts and screws tight to be sure the
equipment is in safe working condition.
• Never store the equipment with petrol in the tank inside
a building where fumes can reach an open flame or
spark.
• Allow the engine to cool before storing in any
enclosure; Clean and maintain the lawn mower before
storage.
• To reduce the fire hazard, keep the engine, silencer,
battery compartment and petrol storage area free of
grass, leaves, or excessive grease.
• Check the grass catcher frequently for wear or
deterioration.
• Replace worn or damaged parts for safety.
• If the fuel tank has to be drained, this should be done
outdoors.
3. PARTS DESCRIPTION (Fig. 1)
1. Upper handle
2. Stop control handle
3. Self-drive control handle
4. Engine speed lever
5. Starter handle
6. Rope guide
Including
A: Spark plug wrench
B: Mulching wedge
C: Discharge guide for side discharge
• Improper maintenance, use of non-conforming
• Only use the recommended blades and spare parts by
• If the blade stopping device doesn't work, please
Transportation and handling
• Whenever the machine is to be handled, raised,
• During transport, fasten the machine securely with
the engine stopped.
7. Grass catch bag
8. Height adjusting lever
9. Deck
10. Spark Plug
11. Fuel cap
12. Oil cap
replacement components, or the removal or
modification of safety components can damage the
lawn mower and injure the operators seriously.
the manufacturer. The use of non-genuine parts can
damage the machine and injure the operators. Keep
the lawn mower in good working condition.
contact service center for help.
transported or tilted you must:
- wear strong working gloves;
- grasp the machine at the points that offer a safe grip,
taking account of the weight and its distribution;
- use an appropriate number of people for the weight
of the machine and the characteristics of the vehicle
or the place where it has to be placed or collected.
ropes or chains.
WARNING: Do not touch rotating blade.
WARNING: Refuel in a well ventilated area with
13. Cable clamp
14. Locking knob
15. Speed adjusting lever
16. Sideward flap for side discharge
9