Table of Contents
Advertisement
To Create a Smart Connect™ Event
1
From your Homescreen, tap
2
If you are opening Smart Connect™ for the first time, tap OK to close the
introduction screen.
3
On the Events tab, tap
4
If you are creating an event for the first time, tap OK again to close the
introduction screen.
5
Add conditions you want to trigger the event under. A condition could be the
connection with an accessory, or a specific time interval, or both.
6
Tap
to continue.
7
Add what you want to happen when you connect an accessory, and set other
settings as desired.
8
Tap
to continue.
9
Set an event name, then tap Finish.
To add a Bluetooth® accessory, you have to first pair it with your device.
To Edit a Smart Connect™ Event
1
Start the Smart Connect™ application.
2
On the Events tab, tap an event.
3
If the event is switched off, drag the slider to the right to turn it on.
4
Tap Edit event, then adjust the settings as desired.
To Delete an Event
1
Start the Smart Connect™ application.
2
On the Events tab, touch and hold the event you want to delete, then tap Delete
event.
3
Tap Delete to confirm.
You can also open the event you want to delete, then tap > Delete event > Delete.
To Set Smart Connect™ to Read out Incoming Text Messages
1
Start the Smart Connect™ application.
2
Tap , then tap Settings.
3
Mark the checkbox beside Text to speech, then confirm activation, if necessary.
If this feature is turned on, all incoming messages are read aloud. To protect your privacy, you
may need to turn off this feature if you are using your device in a public place or at work, for
example.
Managing Accessories
Use the Smart Connect™ application to manage a range of smart accessories you can
connect to your device, including Xperia™ SmartTags, a SmartWatch series watch, or a
wireless headset from Sony. Smart Connect™ downloads any necessary applications
and also finds third-party applications, when available. Previously connected accessories
are shown in a list that allows you to get more information about the features of each
accessory.
To Pair and Connect an Accessory
1
Start the Smart Connect™ application. If you are opening Smart Connect™ for
the first time, tap OK to close the introduction screen.
2
Tap Accessories, then tap
3
Turn on the Bluetooth® function if it is not already on, then tap the name of the
accessory that you want to pair and connect with.
4
If required, enter a passcode, or confirm the same passcode on both your device
and the accessory.
This is an Internet version of this publication. © Print only for private use.
, then find and tap
.
.
130
.
Advertisement
Table of Contents
