Vax POWERHEAT ACH2V101 Let's Get Started page 8

Using your appliance
CAUTION: Always switch the appliance off and unplug from the mains when not in use and allow to fully cool down
before transporting or carrying out any maintenance or troubleshooting checks. Do not cover the appliance or allow
water or other liquids to run into the interior of the appliance, as this could create a fire and/or electrical hazard.
CAUTION: Always take extra precaution when leaving the appliance on for extended periods of time and unattended.
Plug into the mains.
Once the preferred room
temperature is reached,
slowly turn the thermostat
control dial anti-clockwise
until a 'click' is heard.
The LED lights on the heat
selector will switch off.
Slide the switch on the
On/Off and 24hr control
dial to the On position.
Minimum power: MIN
For economic operation, once the preferred temperature
has been reached choose minimum or medium power
on the heat selector switches. The heater will switch
on and off automatically to maintain the selected temperature.
Turn the thermostat
control dial to 'Max'.
Medium power: MED
Select Maximum power: MAX
On heat selector switches,
both LED lights will
illuminate above.
To switch the appliance
off, slide the switch on the
On/Off and 24hr control
dial to the off position.