Getting Started - Vax POWERHEAT ACH2V101 Let's Get Started

Getting started

Assembling your appliance
IMPORTANT: Remove all the packaging covering the appliance.
The wheel plates should only be fitted between the outer fins of the radiator.
Turn the radiator upside
down on a carpet or
soft surface to avoid
any damage.
Tilt the wheel plate and
guide the curved end
of the clamp through
and over the hole.
Make sure it securely
hooks into place.
Turn and stand the appliance in the upright position.
Allow the oil to re-disperse and settle.
Unscrew and remove the
wing nut from the clamp
and hook the clamp around
the outer edge of the fin,
nearest the control panel.
Push the other end of the
clamp through the second
hole and tighten securely
into position using the
wing nut.
Line up the wheel plate
making sure the castor
wheels face out towards
the control panel.
Repeat the process for
the second wheel plate.
Attach to the outer fin
on the opposite side
of the radiator.