Enter your email address and password and click the LOG IN
c.
button.
The Status page displays.
5. Select Settings > Connected Devices.
The Connected Devices section displays the MAC addresses and
virtual MAC addresses for the computers and WiFi devices that are
connected to the extender.
6. On the router, add the extender's virtual MAC addresses and all of the
virtual MAC addresses of the devices connected to the extender to
your router's MAC filter table.
7. Enable the router's MAC filter, wireless access control, or ACL.
I am connected to NETGEAR_EXT and launched a browser. Why
can't I see the web browser setup?
Try these troubleshooting steps:
•
Make sure that your computer is set up to use DHCP (most are).
•
Make sure that the Device Link LED is green and that you are using a
valid IP address.
•
Relaunch the web browser and type www.mywifiext.net in the
address field. Type your email address and password and click the LOG
IN button.
19