Panasonic FZ-Q1 Series Operating Instructions Manual page 26

Troubleshooting (Basic)
n Others
No response.
Cannot connect to a net-
work.
26
l Open Task Manager and close the software application that is not
responding.
l An input screen (e.g., password input screen at startup) may be
hidden behind another window. Touch the application icons at the
bottom of the screen to check.
l Press the power switch for four seconds or longer to shut down
the computer, and then press the power switch to turn it on. If the
application program does not work normally, uninstall and reinstall
the program. To uninstall,
A Open the Control Panel.
Flick from the middle of the Start screen to the top and touch
[Control Panel] under "Windows System".
B Touch [Program] - [Uninstall a program].
l Set the device ([Wireless LAN] / [Bluetooth] / [Wireless WAN] of
[Wireless Configuration]) to [Enabled] in the [Advanced] menu of
the Setup Utility (Wireless Configuration).
l Display "Charm", and touch
Set [Airplane mode] to [Off], and then;
set [Wi-Fi] to [On] (for wireless LAN).
set [Mobile broadband] to [On] (for wireless WAN).
set [GPS] to [On] (for wireless WAN).
set [Bluetooth] to [On] (for Bluetooth).
- [Change PC Settings] - [Network].