Download Print this page

JVC KS-AX204 Instruction Manual page 2

Power amplifier

Advertisement

TERMINAL CONNECTION
TERMINAL CONNECTION
Use ring terminals (not provided) for secure connection.
POWER SUPPLY CONNECTION
The proper lead wire connected to each POWER terminal is as
follows.
• + B and GND: AWG 8 to AWG 4
(The cross section is about 8 mm
2
to 21 mm
2
.)
• REM: AWG 18 to AWG 8
2
2
(The cross section is about 0.8 mm
to 8 mm
.)
¡ Connect to metallic body or chassis.
™-a When you use JVC car receiver with REMOTE OUTPUT, connect
to REMOTE OUTPUT.
™-b When you use a unit without REMOTE OUTPUT, connect to the
accessory circuit of the car which is activated by the ignition
switch. In this case, noise may occur when the car receiver is
turned on or off. To avoid this noise, do not turn on or off the
car receiver itself. You can turn on or off the car receiver along
with the on/off operation of the ignition switch.
£ After all connections have been made, connect to the battery
12 V.
– Be sure to place the fuse near the battery as shown.
4 Car battery
5 Ignition switch
6 JVC car receiver, etc.
* Not supplied
AUDIO INPUT CONNECTION
2
AUDIO INPUT CONNECTION
When your receiver is equipped with line output.
1 JVC car receiver, etc.
2 Line out (Front)
3 Line out (Rear)/ Subwoofer
*1 Not supplied
When your receiver is NOT equipped with line output.
White "FRONT LEFT (+)"
Black "RECEIVER GND"
Gray "FRONT RIGHT (+)"
Green "REAR LEFT (+)"
Black "RECEIVER GND"
Purple "REAR RIGHT (+)"
4 JVC car receiver, etc.
*2 Example: connecting to the ground
*3 Rear ground terminal
SPEAKER CONNECTIONS
The proper lead connected to each SPEAKER OUTPUT terminal is AWG
2
18 to AWG 12. (The cross section is about 0.8 mm
to 3.3 mm
4-speaker system—Normal Mode
• Use the speakers with an impedance of 2 Ω to 8 Ω.
1 Right Front
2 Left Front
3 Right Rear
4 Left Rear
2-speaker system plus subwoofer—Bridge Mode
• Use the speakers with an impedance of 2 Ω to 8 Ω.
• Use the subwoofer with an impedance of 4 Ω to 8 Ω.
5 Right Front
6 Left Front
7 Subwoofer
English
2
English
2
.)
POWER SUPPLY CONNECTION
SPEAKER CONNECTIONS
3

Advertisement

loading