Additional Information - LG BP556 Simple Manual

Additional Information

Specification
y Model : WA-12M12FK
y Manufacturer :
Asian Power Devices Inc.
AC adapter
y Input : 100-240 V~,
50-60 Hz 0.5 A Max.
y Output : 12 V 0 1 A
Networked 1.5 W
standby power (If all network ports are
consumption activated.)
Dimensions Approx.
(W x H x D) 270 mm x 43 mm x 195 mm
Net Weight
0.87 kg
(Approx.)
Bus Power Supply
5 V 0 500 mA
(USB)
Design and specifications are subject to change
without notice.
How to disconnect the wireless network
connection or the wireless device
Turn off the unit by using the power button.
Replacement of battery
Open source software notice
To obtain the source code under GPL, LGPL, MPL and
other open source licenses, that is contained in this
product, please visit http://opensource.lge.com.
In addition to the source code, all referred license
terms, warranty disclaimers and copyright notices are
available for download.
LG Electronics will also provide open source code
to you on CD-ROM for a charge covering the cost
of performing such distribution (such as the cost of
media, shipping and handling) upon email request
to opensource@lge.com. This offer is valid for three
(3) years from the date on which you purchased the
product.
POWER: This unit operates on a mains supply of 100-
240V~, 50-60Hz.
Wiring: This unit is supplied with a BS 1363 approved
main plug. When replacing the fuse, always use of the
same rating approved to BS 1362. Never use this plug
with the fuse cover omitted. To obtain a replacement
fuse cover contact your dealer. If the type of plug
supplied is not suitable for the mains sockets in your
home, then the plug should be removed and a suitable
type fitted. Please refer to the wiring instructions
below:
Warning: A mains plug removed from the mains lead
of this unit must be destroyed. A mains plug with bared
wires is hazardous if inserted in a mains socket. Do not
connect either wire to the earth pin, marked with the
letter E or with the earth symbol 6 or coloured green
or green and yellow. If any other plug is fitted, use
same rating of fuse in the plug.
Important: The wires in this mains lead are coloured in
accordance with the following codes:
- BLUE: NEUTRAL, BROWN: LIVE - As the colours
of the wires in the mains lead of this unit may not
correspond with the coloured marking identifying the
terminals in your plug, proceed as follows: The wire
which is coloured blue must be connected to the
terminal which is marked with the letter N or coloured
black. The wire which is coloured brown must be
connected to the terminal which is marked with the
letter L or coloured red.