Timer Programming 28 - Panasonic TX-40DSN638 Operating Instructions Manual

●
This recording may not start if another recording is in
progress, TV signal condition is bad or there are no
images displayed.
■
To operate [REW LIVE TV]
● To pause
●
To search backward (up to 90 minutes)
●
After pausing or searching backward, the following
buttons are available for operation.
Search backward
Playback / Pause
Search forward
Return to the current programme
■
To stop [REW LIVE TV]
Recording Setup
REW LIVE TV
select [Off]
store
●
If you stop [REW LIVE TV], the recorded content for
[REW LIVE TV] will be deleted.
●
[REW LIVE TV] is stopped and the recorded content
is deleted automatically in the following conditions:
(Even if [REW LIVE TV] stops for the following
conditions, as long as the setting is [Auto], a new
recording starts automatically in a condition that
makes the recording available.)
Other channels selected
•
Locked channel selected
•
Invalid channel selected
•
No TV signal
•
External input selected
•
When the full-screen application (TV Guide, Media
•
Player, eHELP, etc.) is launched
When the TV enters Standby or is turned off
•
When another recording starts
•
28
English
/
Auto
Off
Timer Programming
This function allows you to select programmes that you
want to be reminded to watch or record to the USB
HDD.
●
For details, refer to [eHELP] (Recording > Timer
Programming).
1
Select DVB-S, DVB-C, DVB-T or
DVB-via-IP
2
Display the menu and select [Timer]
Timer
3
Select [Timer Programming]
select
access
Set timer event details
1
Start making the settings
2
Select [USB HDD Rec.] or [Reminder]
[USB HDD Rec.]:
Records the programme to the USB HDD.
When the start time comes, the channel will be
switched automatically and the video and audio
signals will be output. 2 minutes before the start time,
a reminder message may appear if you are watching
TV.
[Reminder]:
Reminds you to watch the programme.
When you are watching TV, a reminder message
appears 2 minutes before the start time.
Press the OK button to switch to the programmed
channel.
3
Select and set the item (channel, date, start time, end
time) (repeat the operations as below)
select the item
●
and can also be entered with numeric
buttons.
select
access
set