Browning Control; Cancel Button - Breville VTT714 Instructions Manual

BROWNING CONTROL

The browning control regulates how much
the bread is toasted—in other words, the
colour of the toast. Lower settings produce
lighter toast and higher settings produce
darker toast.
When setting the browning control,
remember that dry or thin slices of bread
will toast quicker and require a lower
setting. Moist or thick slices of bread will
require a higher setting.

CANCEL BUTTON

The toasting process can be stopped at
any time by pressing the cancel button.
HIGH LIFT FEATURE
The high lift feature uses the loading
handle to help you to remove the toast.
When toasting has finished, simply lift
the loading handle upwards from its rest
position to raise the toast and make it
easier to remove.
FROZEN BREAD FUNCTION
The frozen bread function allows you
to toast bread straight from the freezer.
Insert the bread into your toaster, press
the loading handle down and then press
the frozen bread button. Your toaster will
extend the toasting time to allow the bread
time to defrost. Watch the toast to ensure
that it doesn't burn.
REHEAT FUNCTION
The reheat function will heat up toast that
has cooled or gone cold. Press the loading
handle down then press the reheat button.
Keep a careful eye on the toast to ensure
that it doesn't burn. Don't use the reheat
function on buttered toast.
BEFORE FIRST USE
Never force bread into the toasting
slots. Bread should fit easily into the
toasting slots. Never toast slices of
bread that have been buttered. Take
extra care when toasting items that
4
contain sugar, jam or preserves, as
there is a risk of the ingredients leaking
into the toaster, causing overheating.
Don't use bent, damaged or broken
bread in your toaster as it may cause it
to jam.
Carefully remove your toaster from its box.
Remove all packaging from inside the
toasting slots.
Position your toaster on a stable, secure,
dry and level work surface away from the
edge. Bread may burn therefore do not use
the appliance near or below combustible
materials such as curtains. Never use the
toaster below wall cupboards or shelves.
Before connecting to a power source,
make sure your mains supply voltage
is the same as the one indicated on the
appliance. Connect the plug to a suitable
power outlet and make sure that the power
cord does not overhang the work surface.
When you first use your toaster, there may
be a slight odour as the heating elements
warm up for the first time. This is quite
normal and not a cause for concern. To
remove the odour, simply operate your
toaster for the first time without any bread
in it.
USING YOUR TOASTER
1. Set the level of toasting using the
browning control. The higher the
number selected, the darker the toast
will be.
2. Place the bread into the toasting slots.
You can toast one, two, three or four
slices of bread. Press the loading
handle down until it latches. The bread
will be lowered into the toaster and
toasting will begin.
The loading handle will not latch if
your toaster is not connected to the
mains supply, and may not latch if the
browning control is set to its minimum
or lowest setting.
3. When toasting has finished, the loading
handle will rise and the toasted bread
can be removed. You can lift the