Removing A Wheel - Yamaha GRIZZLY 450 YFM45GDXG Owner's Manual

1. Tail/brake light assembly
2. Tail/brake light bulb holder
3. Remove the burnt-out bulb by pushing it in
and turning it counterclockwise.
1. Tail/brake light bulb holder
2. Tail/brake light bulb
4. Insert a new bulb into the bulb holder, push it
in, and then turn it clockwise until it stops.
5. Install the bulb holder (together with the bulb)
by turning it clockwise.
6. Install the tail/brake light assembly by install-
ing the washers and the nuts.
EBU25652

Removing a wheel

1. Place the ATV on a level surface.
2. Loosen the wheel nuts.
8-61
8