Video Capture Mode - Vivitar DVR 503v2 User Manual

Video Capture Mode

The Video Capture Mode allows you to capture videos with your digital camcorder.
When the camcorder is first powered ON, it will be in Video Capture Mode.
TAKING A VIDEO
1) Selecting the Scene Using the LCD Display:
While in Video Capture mode, use the LCD display to direct the camcorder at the scene you
would like to capture.
2) Zoom Options:
Use the T/ Zoom In and W / Zoom Out buttons located to the left of the LCD screen to
better set the camcorder display if desired. You can magnify your subject up to 4 times using
the digital zoom. A magnifying glass icon
indicating the selected zoom.
3) Capturing the Video:
 Press the
 A red, blinking icon appears at the top of the LCD screen indicating that the recording is in
progress.
 To STOP the video recording, press the Shutter button again.
 The video is automatically saved to the camcorder's SD Memory card.
Note: The amount of recording time available for the resolution selected appears on the top
center of LCD screen while in 'Standby'. The lower the resolution setting the more recording time
is available. However, videos recorded at lower resolution are of less quality than videos recorded
at the higher resolution.
Remember, the amount of time that you can capture videos also depends on the size of the SD
memory card inserted as well as the video resolution selected.
Shutter button to START the video capture.
appears on the bottom right of the LCD screen
13