Controlling Audio; Controlling General Audio; Equalizer Control; Subwoofer Settings - Kenwood DMX100BT Instruction Manual

Controlling Audio

Controlling General Audio

1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [Audio].
4
Touch [Speaker].
5
Set each item as follows.
[C] [D] Adjust the left and right volume balance. (L12
to R12)
[R] [S] Adjust the front and rear volume balance.
(F12 to R12)
[RESET] To clear the adjustment.
Ñ Bass boost
1
Displays the any source control screen.
2
Touch [BASS].
Sets the amount of bass boost among "OFF" (gray)/
"ON" (white).

Equalizer Control

1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [EQ].
4
Set each item as follows.
1
2
1 To recall the preset equalizer curve.
2 You can select frequency bar and adjust its level by
[+], [–]. (-9 to +9)
• The adjustments are stored and "User" is activated.
3 The current EQ curve returns to flat.

Subwoofer settings

1
Press the <MENU> button.
2
Touch [SETUP].
3
Touch [Audio].
4
Touch [Subwoofer].
5
Set each item as follows.
Activates of deactivate the subwoofer.
Level Adjusts the subwoofer level. (-6 to +6)
LPF Low Pass Filter adjustment.
Slope Sets a crossover slope.
[RESET] To clear the adjustment.
3
English |
15