Bluetooth Smartphone; Register Your Smartphone To The Unit; Receive A Phone Call - Kenwood DMX100BT Instruction Manual

Bluetooth smartphone

Bluetooth smartphone
Ñ About the Bluetooth smartphone and
Bluetooth audio player
This unit conforms to the following Bluetooth
specifications:
Version
Bluetooth Ver.3.0
Profile
Smartphone/ Cell-phone:
HFP (V1.6) (Hands Free Profile)
PBAP (V1.1.1) (Phonebook Access Profile)
Audio player:
A2DP (V1.3) (Advanced Audio Distribution Profile)
AVRCP (V1.5) (Audio/Video Remote Control Profile)
Sound codec
SBC
Ñ About mobile phones compatible with
Phone book Access Profile (PBAP)
If your mobile phone supports PBAP, you can display
the following items on the touch panel screen when
the mobile phone is connected.
• Phone book (up to 1000 entries)
• Dialed calls, received calls, and missed calls (up to 50
entries in total)

Register your smartphone to the unit

You can use your Bluetooth smartphone when paired
to this unit.
• You can pair the device and the unit using SSP (Secure
Simple Pairing) which only requires confirmation.
• Once a device and the unit are paired, the unit is
registered on the device. When you next use the
device with the unit, you can connect the device and
the unit by selecting from the registered device list on
your device.
• One device can be connected at a time.
• When you register a new Bluetooth device, disconnect
the Bluetooth device currently connected and then
register the new device.
1
Turn on the Bluetooth function on your
smartphone/cell-phone.
2
Search the unit ("DMX100BT") from your
smartphone/cell-phone.
3
Confirm the request on the device
Pairing and connection are established. "Connect
OK" appears.
• appears when the Bluetooth smartphone is
connected.
12
• appears when the Bluetooth audio player is
connected.
Ñ Disconnecting the device
• Turn off the Bluetooth function from your
smartphone/cell-phone.
• Turn off the ignition switch.

Receive a phone call

1
Touch [Ü].
• [Ý] : Reject an incoming call.
Ñ Operations during a call
Ending a call
[Ý]
You can send tones by touching desired keys
on the screen.
Switches the speaking voice output between
cell-phone (light off) and speaker (light on).
⿠Adjust the receiver volume
Press the <S> or <R> button.