Table of Contents
Advertisement
8.4 Removing the transport
support
Your appliance is equipped with
transport support to secure the door
during transportation.
1. Open the door.
2. Remove the transport support from
the door sides.
3. Remove the transport support from
the lower hinge (some models).
3
Some models are fitted with a silencing
pad under the cabinet. Do not remove
this pad.
8.5 Rear spacers
Install the two spacers and the locking
pins provided within the accessory bag
as shown in the figure.
8.6 Levelling
When placing the appliance ensure that
it stands level. If necessary adjust the
feet using the adjustment spanner
supplied. Door alignment is dependent
on proper levelling.
8.7 Door reversibility
WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
1. Remove the ventilation grille.
Remove the filling and install it on the
opposite side of the grille.
2
2. Lay down the appliance back side
down on a wooden support.
3. Unscrew the upper hinge (A1) and
the cover washer (A2) and install this
on the opposite side.
A1
4. Unscrew the lower hinge (1). Move
the pin to the opposite side (2).
ENGLISH
13
A2
Advertisement
Table of Contents
