Yamaha GRIZZLY 660 YFM66FGW Owner's Manual page 96

1. Quick fastener
2. Panel C
To install the panel
1. Place the panel in the original position and in-
8
stall the quick fasteners.
2. Install the front carrier by installing the bolts
and tightening them to the specified torques.
Tightening torques:
Carrier bolt (top):
26 Nm (2.6 m·kgf, 19 ft·lbf)
Carrier bolt (under fenders):
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3. Install the stay covers.
Panel E
To remove the panel
Remove the bolts, and then take the panel off.
1. Panel E
2. Bolt
To install the panel
Place the panel in the original position and install
the bolts.
Panel F
To remove the panel
Pull outward on the areas shown.
8-12