Handlebar Switches - Yamaha GRIZZLY 660 YFM66FGW Owner's Manual

EBU18060

Handlebar switches

1. Light switch " / /OFF"
2. Start switch " "
3. Engine stop switch " /
4. Override switch "OVERRIDE"
5. Horn switch " "
EBU18080
Engine stop switch "
Set this switch to " " before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this switch
to stop the engine in an emergency situation. The
engine will not start or run when this switch is set
to " ".
"
/ "
EBU18100
Start switch " "
Push this switch to crank the engine with the start-
er.
ECB00050
CAUTION:
See the starting instructions on page 6-1 prior
to starting the engine.
EBU18151
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
ECB00040
CAUTION:
Do not use the headlights with the engine
turned off for an extended period of time, oth-
erwise the battery may discharge to the point
that the starter motor will not operate properly.
If this should happen, remove the battery and
recharge it.
EBU18170
Horn switch "
Press the switch to sound the horn.
4-6
/ /OFF"
" to turn on the low beams
" to turn on
"
4