Handing Precautions; Player Maintenance - Curtis DVD1047 User Manual

DVD PLAYER
REFERENCE
MENU
SCREEN
CUSTOM
Handling Precautions
Maintenance
Hold the disc by the edge so the surface will not be soiled with fingerprints. Fingerprints, dirt and
scratches can cause skipping and distortion. Do not use record cleaning sprays, benzene, thinner.
Static electricity prevention liquids or any other solvent. Be careful not to drop or bend the disc. Do not
try to close the disc tray when disc is not installed properly. Be sure to store the disc in its exclusive
case when not in use.
Handling
Wipe gently with a soft, damp (water only) cloth. Move the cloth from the centre hole towards the outer
edge. lmproper disc disc storage: Discs may be damaged if they are stored in the following places: Areas
exposed to direct sunlight; Humid or dusty areas; Areas directly exposed to a heat outlet or heating
appliance.

Player Maintenance

Be sure to turn the unit off and disconnect the AC power cord before maintaining the unit. Keep the unit
clean. If the surfaces are extremely dirty, wipe the unit with a dry soft cloth. Never use alcohol, benzene
or other chemicals. Do not use compressed air to remove dust. Ask the technician to maintain the unit
when trouble happens.
SUBMENU OPTIONS
4:3 PS
TV Type
4:3 LB
16:9
On
Screen Saver
Off
NTSC
TV System
PAL
AUTO
Video output
S-Video
Normal
Brightness
Bright
Soft
-3
-2
-1
0
Contrast
+1
+2
+3
+4
PG
PG13
Parental Ctrl
R
NC-17
Old
Password New
Verify
On
Angle Mark
Off
Default Read
DESCRIPTION
Set TV screen at 4:3 Pan Scan
Set TV at screen 4:3 Letter Box
Set TV at screen 16:9
Set screen saver to ON or OFF.
Output signal as NTSC
Output signal as PAL
Output signal as per default of disc
S-Video output
Select normal, bright, or soft to personal
preference.
Select various levels to adjust the contrast
according to personal preference.
Parents Strongly Cautioned, Some material
Maybe in appropriate for children under 13.
No one under 17 admitted
Input number by users to change password,
default setting:8888
Set the Angle mark to ON or OFF
Return to factory setup
16