Mute; Vol+/Vol; Return; Osd - Curtis DVD1047 User Manual

DVD PLAYER
OPERATION

MUTE

Press MUTE button during play, the player shows mute and there is no audio output (silence), press
again to cancel MUTE.

VOL+/VOL-

Press VOL+/VOL- button play may change volume for audio output.

RETURN

For VCD when playing 2.0 PBC is operating. Press RETURN key, it will return to menu mode.
When playing DVD/MP3/JPG discs. Press RETURN key, it will return to menu mode.

OSD

Press OSD button during play to show the disc s relevant information on TV screen(such as playing
time, chapter number, playback status).

ZOOM

Zoom function can only be operated in JPEG disc and VCD/DVD format disc. By pressing zoom
button when playing DVD/VCD discs, there are 3 levels of zoom available (ZOOMx2, ZOOMx4,
ZOOMx1). When playing JPEG disc, there 5 levels of zoom available(150%, 200%, 25%, 50%, 100%)
Note: Note: Zoom function is not working on PAL system DVDs.
MP3 does not have this function

A-B REPEAT

Press A-B button during playback at the point where repeat play is to commence (a) then press again
at the point where repeat play is to be concluded (B). Repeat playback between point (A) and point (b)
starts. Press A-B button once more where TV screen appears REP OFF to return to normal play.

REPEAT

Press the repeat key to choose repeat play chapter or title (DVD) and play single audio or full disc
(VCD, CD, MP3).
Note: Some VCD do not have repeat function with PBC ON state.

ANGLE/AUDIO

Press ANGLE continuously during playback DVD disc to toggle the disc between available angles
recorded on the disc if the disc has multi-angle function. Press AUDIO button during playback to
toggle between available audio language recorded on the disc if the disc has this multi-language.
Note: Press AUDIO button could toggle available audio language soundtracks.

PROGRAM

Press PROGRAM button, the program playback screen appears on the TV monitor, 20 tracks
or chapters can be programmed. Use
preferred track (CD/VCD) or title and chapter (DVD), then press ENTER button to confirm(also
you can press the number button to input the track number or title/chapter number directly).
Note: It is invalid to input the number larger than available. Use CLEAR button to amend false or
unsatisfied settings. You can only press the PLAY button on the remote control to start playing after
you finish the program setting. Press the PROGRAM button directly to return to normal play mode.
In this case, the program is not confirmed.
" : SELECT
PBC function (only VCD)
When playing VCD 2.0 press PBC button to display title menu use number key choice and ENTER
button to play music.
: PLAY " shown on screen is only used for indication, no function for cursor
button on the remote control to select your
12
.