Toro 78370 Operator's Manual page 6

3
1
Figure 6
1. Slots in the side mounting
brackets (2)
2. Belt guide
5. Start the tractor.
6. Lower the attachment lift arm fully and adjust the
mower position until you can pull out on the J-pin of
the lift arm and slide it into the slot in the mounting
bracket of the mower (Fig. 7).
1
Figure 7
Left Side of Tractor Shown
1. J-pin
7. On the left side, pull out the attachment lift J-pin and
slide it into the slot on the other mower mounting
bracket.
8. After the two J-pins are seated through the mower
mounting brackets, using the attachment lift and your
hand on the right front adjustable mower wheel bracket
(Fig. 8), position the mower so its attachment bar fits
into the mid Attach-A-Matic
2
m–3468
3. Front to rear adjustment
rod
2
m–3456
2. Mower slot in side
mounting bracket.
mount.
Caution
Movement of the attachment lift between the
mower mounting brackets and the attachment lift
arms can injure a person when aligning the deck
with the lift arms.
Keep hands away from moving parts while
operating the attachment lift.
Always position the mower with your hand on
the right front mower wheel bracket.
Never try to position the mower with your
hands on the mower mounting brackets or
below the mower housing.
Figure 8
1. Place hand here
9. Turn the lever of the Attach-A-Matic
counterclockwise to lock the mower to the tractor
(Fig. 9).
6
1
m–3521