Removing And Installing The Recycling Baffle (Model 78375) - Toro 78370 Operator's Manual

1
Figure 22
1. Mid Attach-A-Matic
button
10. Pull the two spring loaded J-pins from the deck lift arms
and twist them slightly so that they stay disengaged
(Fig. 23).
1
Figure 23
1. J-pin
11. If you wish to remove the pulley box, push the latch
release buttons on the front Attach-A-Matic
and raise the latch levers to open the latches holding the
pulley box. Remove the pulley box.
2
m–3457
2. Mid Attach-A-Matic
lever
m–3456
(Fig. 24)
12
1
Figure 24
1. Front Attach–A–Matic
button (one on each side)
2. Front Attach–A–Matic
latches
12. Start the tractor and raise the attachment lift to provide
ample clearance to slide out the mower.
13. Stop the engine and remove the ignition key.
14. Slide the mower out from the right side of the tractor.
Removing and Installing the
Recycling Baffle (Model 78375)
Removing the Recycling Baffle
Complete the following procedure to convert your
Recycler mower (model 78375) into a side discharge
mower:
1. Remove the locknuts and bolts from the right side baffle
(Fig. 25).
2
2
3
m–5511
3. Pulley box