Advertisement
5. OPERATION
1.1 Square Drive
1.2 Trigger / Speed Control
1.3 Direction Control / Trigger Lock
1.4 Battery Release Clips (both sides)
1.5 Battery State Test Button
1.6 Battery Charge Indicators
WARNING! Ensure that you read, understand and apply the safety instructions before use.
‰
5.1. uSING ThE WRENch.
5.1.1. Use only impact sockets which are specifically designed for use with an impact wrench. The use of normal chrome vanadium sockets
is dangerous, since these are more brittle and are liable to shatter.
5.1.2. Fit the socket to the wrench by snapping it onto the square drive (fig.1.1).
5.1.3. Fit the battery pack to the wrench by aligning the tongue on the battery with the groove in the housing and slide it into place. Ensure
that the battery pack is firmly located, you will hear an audible click when it has locked into position.
5.1.4. Select the required direction of rotation. To change direction, push switch (fig.1.3) to the left or right. Familiarise yourself with this
operation before use. DO NOT attempt to change the direction of rotation whilst the trigger (fig.1.2) is depressed.
When the wrench is not in use, use the same switch to lock off the trigger by placing the switch in the middle position.
5.1.5. When tightening, release the trigger as soon as the impact sound is heard. Take care not to over-torque small fixings.
Note: On critical fixings, final tightening should be carried out using a torque wrench, setting it according to the product or the
vehicle manufacturer's specifications.
6. MAINTENANcE
6.1. cLEANING.
Keep the outer case of the wrench clean and free from grease. DO NOT wash with water or use solvents or abrasives, use a damp cloth.
For any other service or maintenance, contact your authorised service agent.
WEEE REGuLATIONS
Dispose of this product at the end of its working life in compliance with the EU Directive on Waste Electrical and Electronic Equipment
(WEEE). When the product is no longer required, it must be disposed of in an environmentally protective way. Contact your local solid
waste authority for recycling information.
ENvIRONMENT PROTEcTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and packaging should be sorted, taken to
a recycling centre and disposed of in a manner which is compatible with the environment. When the product becomes completely
unserviceable and requires disposal, drain any fluids (if applicable) into approved containers and dispose of the product and fluids
according to local regulations.
BATTERY REMOvAL
Under the Waste Batteries and Accumulators Regulations 2009, Jack Sealey Ltd are required to inform potential purchasers of products
containing batteries (as defined within these regulations), that they are registered with Valpak's registered compliance scheme. Jack
Sealey Ltd's Batteries Producer Registration number (BPRn) is BPRn00705.
Note: It is our policy to continually improve products and as such we reserve the right to alter data, specifications and component parts without prior
notice.
Important: no Liability is accepted for incorrect use of this product.
Warranty: Guarantee is 12 months from purchase date, proof of which is required for any claim.
Sealey Group, Kempson Way, Suffolk Business Park, Bury St Edmunds, Suffolk. IP32 7AR
01284 757500
© Jack Sealey Limited
01284 703534
sales@sealey.co.uk
Original Language Version
fig.1
www.sealey.co.uk
CP2612, CP2634
Issue1 - 06/12/17
Advertisement
