Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Yeastar Technology S412
Summary of Contents for Yeastar Technology S412
- Page 1 Yeastar S412 VoIP PBX Installation Guide Version: 1.3 Date: 2017.10.10...
-
Page 2: Table Of Contents
Yeastar S412 Installation Guide Content CONTENT ..................................2 WELCOME ..................................3 BEFORE YOU START ................................ 4 Package Contents ............................4 Hardware Overview ............................4 LED Indicators and Ports ..........................5 INSTALLATION ................................7 Safety Disclaimers and Installation Warnings....................7 Module Installation ............................7 Desktop Installation ............................10... -
Page 3: Welcome
FXS, PSTN, ISDN BRI, and GSM/3G/4G. This guide describes how to install the S412 and how to log in the web GUI to configure the system. Once you complete the installation, refer to the Yeastar S-Series Administrator Guide for instructions on how to perform configurations on the system. -
Page 4: Before You Start
Yeastar S412 Installation Guide Before You Start Before you begin to install the S412 IP Phone System, please check the package contents to verify that you have received the items below. If there is any problem, please contact your provider. -
Page 5: Led Indicators And Ports
Yeastar S412 Installation Guide LED Indicators and Ports LED Indicators Indication Status Description The power is switched on POWER Power status The power is switched off Blinking The system is running properly System System status Static/Off The system goes wrong Static Linked normally. - Page 6 Yeastar S412 Installation Guide TF Slot Insert TF card. Yeastar S412 provides two 10/100M adaptive RJ45 Ethernet ports. There are 3 Ethernet modes for the system. The default mode is “Single”. • Single: LAN port interface will be used for uplink connection. WAN port is Ethernet Port disabled.
-
Page 7: Installation
Before cleaning the device, cut off the power supply. Environment Install the Yeastar S412 IP PBX in a location that is clean, free from vibration, electric shock, and temperature/humidity extremes. The operating temperature should be kept below 104° F (40° C). Module Installation Yeastar S412 is designed with 8 fixed on-board FXS ports and 4 reserved slots to insert different modules according to your requirement. - Page 8 Yeastar S412 Installation Guide S412 Main Board STEP 1 Loosen the screws on the bottom of the device and remove the upper cover. STEP 2 Insert the module to the Module Slot. 8/12...
- Page 9 Yeastar S412 Installation Guide STEP 3 Insert a SIM card on the GSM/3G/4G module following the instructions. Skip this step if no GSM/3G/4G module installed. STEP 4 Close the cover and fix the screws. STEP 5 Rotate the antenna into the Antenna Socket. Skip this step if no GSM/3G/4G module installed.
-
Page 10: Desktop Installation
Yeastar S412 Installation Guide Desktop Installation WARNING • Please set 5~10cm gaps around the device for air circulation. • Please avoid any heavy thing placed on the device. STEP 1 Place the IP PBX on a steady platform. STEP 2 Remove the adhesive backing paper from the rubber feet. -
Page 11: Connecting The Equipment
Yeastar S412 Installation Guide Connecting the Equipment STEP 1 Connect one end of a network cable to the LAN port of Yeastar S412, and the other end to any port of your company’s LAN switch/router. STEP 2 Plug the provided power adapter into the power jack on S412 and the other end to a standard electrical wall socket. -
Page 12: Getting Started With The Configuration
Yeastar S412 Installation Guide Getting Started with the Configuration Yeastar S412 IP Phone System provides web-based configuration interface for administrator. The administrator can manage the device by logging in the Web interface. • Access path: https://192.168.5.150:8088 • User Name: admin •...