MSI Z170M MORTAR User Manual page 15

Internal Connectors
I/O Controller
Hardware Monitor
Form Factor
BIOS Features
Continued from previous page
● 1x 24-pin ATX main power connector
● 1x 8-pin ATX 12V power connector
● 6x SATA 6Gb/s connectors
● 2x USB 3.1 Gen1 connectors (support additional 4 USB
3.1 Gen1 ports) (Z170M MORTAR)
● 1x USB 3.1 Gen1 connector (supports additional 2 USB
3.1 Gen1 ports) (B150M MORTAR)
● 1x USB 2.0 connector (supports additional 2 USB 2.0
ports)
● 1x 4-pin CPU fan connector
● 2x 4-pin system fan connectors
● 1x Clear CMOS jumper
● 1x Front panel audio connector
● 2x Front panel connectors
● 1x TPM module connector
● 1x Chassis Intrusion connector
● 1x Serial port connector
NUVOTON NCT6793D Controller Chip
● CPU/System temperature detection
● CPU/System fan speed detection
● CPU/System fan speed control
● m-ATX Form Factor
● 9.6 in. x 9.6 in. (24.4 cm x 24.4 cm)
● 1x 128 Mb flash
● UEFI AMI BIOS
● ACPI 5.0, PnP 1.0a, SM BIOS 2.8
● Multi-language
Continued on next page
5
Specifications