Black Horse Model PERCIVAL P-56 PROVOST Instruction Manual Book
  1. Manuals
  2. Brands
  3. Black Horse Model Manuals
  4. Radio control plane
  5. PERCIVAL P-56 PROVOST
  6. Instruction manual book

Black Horse Model PERCIVAL P-56 PROVOST Instruction Manual Book

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
PERCIVAL P-56 PROVOST
OLEO STRUTS LANDING GEAR.
ALL BALSA - PLY WOOD CONSTRUCTION.
COVERED WITH ORACOVER
Glow and EP
95% ALMOST READY TO FLY
SPECIFICATION:
- Wingspan: 1,644mm (64.72 in).
- Length: 1,354mm (53.31 in).
- Weight: 4.5 kg (9.9 lbs).
- Wing area: 48dm .
- Wing loading: 93.75g/dm .
- Wing type: Naca Airfoil.
- Servo mount: 42mm x 21mm.
- Gear type: Oleo struts for main gear
and spring wire for tail gear (included).
- Spinner: 58mm.
Instruction Manual Book
2
2
Item code: BH164.
Parts listing required (not included):
- Radio: 05 channels.
- Servo: 08 servos.
- Engine:
65 - 75
2 stroke
- Motor: Brushless outrunner 1200-2200W, 650KV.
- Propeller: Suit with your engine.
Recommended Motor
and Battery set up (not included):
- Motor: RIMFIRE.60.
- Lipo cell: 6 cells 4,000-5,000mAh.
- Receiver battery: 6V/ 1200-2000mAh NiMH.
- ESC: 80A.
; 15 cc gas.
Made in Vietnam.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PERCIVAL P-56 PROVOST and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Black Horse Model PERCIVAL P-56 PROVOST

Summary of Contents for Black Horse Model PERCIVAL P-56 PROVOST

  • Page 1 Instruction Manual Book Item code: BH164. PERCIVAL P-56 PROVOST OLEO STRUTS LANDING GEAR. ALL BALSA - PLY WOOD CONSTRUCTION. COVERED WITH ORACOVER Glow and EP 95% ALMOST READY TO FLY SPECIFICATION: Parts listing required (not included): - Wingspan: 1,644mm (64.72 in).
  • Page 2 PERCIVAL P-56 PROVOST Item code: BH164 This instruction manual is designed to help you build a great flying aeroplane. Please read this manual thoroughly PERCIVAL P-56 PROVOST before starting assembly of your . Use the parts listing below to identify all parts.

  • Page 3: Tools And Supplies Needed

    PERCIVAL P-56 PROVOST Item code: BH164 TOOLS & SUPPLIES NEEDED EPOXY A EPOXY B Epoxy Glue (5 minute type). Hand or electric drill. Epoxy Glue (30 minute type). Threadlocker (screw cement). Hobby knife. Some more tools. Awl. Assorted drill bits.
  • Page 4 PERCIVAL P-56 PROVOST Item code: BH164 Decal sheet. : Fuselage. : Wing panel ( 2a, 2b . : Horizontal stabilizer. : Rudder. : Aluminium wing dihedral brace. : Cowling. : Spinner. : Cockpit fuselage (8a: Canopy, 8b : Pilot, c: Top hatch fuselage.).
  • Page 5 PERCIVAL P-56 PROVOST Item code: BH164 * Apply drops of thin CA to the top and bottom of each 1. INSTALLING THE AILERONS, FLAPS hinge. Do not use CA accelerator. After the CA has fully hardened, test the hinges by pulling on the aileron.
  • Page 6 PERCIVAL P-56 PROVOST Item code: BH164 3. INSTALLING THE CONTROL HORNS, LINKAGES Insert the 90 degree bend down through the hole in the 5mm Silicone Tube - - - - - 4 - - - 4 control horn. Install one nylon snap keeper over the...
  • Page 7 PERCIVAL P-56 PROVOST Item code: BH164 Wing p lastic light. 3x15mm Secure 5mm Collar Secure 5mm Washer 5x40mm C/A glue Apply threadlocker 3x12mm Secure Repeat the procedure to install the opposite wing.

  • Page 8: Installing The Engine Mount

    PERCIVAL P-56 PROVOST Item code: BH164 5. INSTALLING THE ENGINE MOUNT There are two options: 1. Electric motor 2. Engine mount. OPTION 1: ELECTRIC MOTOR 10x50mm 4x60mm 4x20mm 4x20mm Secure...
  • Page 9 PERCIVAL P-56 PROVOST Item code: BH164 OPTION 2: ENGINE MOUNT, FUEL TANK 4x30mm 4x30mm 4x30mm INSTALLING THE STOPPER ASSEMBLY 1) The stopper has been pre-assembled at the factory. Not included. Be sure to equip air vent pipe. Tygon tubing (Gas). And silicone tubing (Methanol).

  • Page 10: Installing The Fuselage Servos

    PERCIVAL P-56 PROVOST Item code: BH164 8) Feed three lines through the fuel tank compartment * Locate the long piece of wire used for the throttle and through the pre-drilled hole in the firewall. Pull the pushrod. One end of the wire has been pre-bend in to a lines out from behind the engine, while guiding the fuel "Z"...

  • Page 11: Installing The Throttle Pushrod

    PERCIVAL P-56 PROVOST Item code: BH164 7. INSTALLING THE THROTTLE PUSHROD Pushrod wire Install one adjustable metal connector through the third hole out from the center of one servo arm, Fuselage top side enlarge the hole in the servo arm using...

  • Page 12: Installing Horizontal Stabilizer

    PERCIVAL P-56 PROVOST Item code: BH164 9. INSTALLING HORIZONTAL STABILIZER 1) Elevator install as same as the way of aileron. Check to mark sure the wing and stabilizer are paralell. If they are not, lightly sand the opening in 2) Using a modeling knife, carefully remove the film the fuselage for the stabilizer until the stabilizer is covering from the tail slots at the rear of the fuselage.
  • Page 13 PERCIVAL P-56 PROVOST Item code: BH164 ELEVATOR CONTROL HORN INSTALLATION 5mm Silicone Tube - - - - - 2 - - - 2 Flaslink Silicone Tube - - - - 2 Servo arm - - - - - - - 2...

  • Page 14: Rudder Installation

    PERCIVAL P-56 PROVOST Item code: BH164 10. RUDDER INSTALLATION Rudder control horn 5mm Silicone Tube - - - - - 1 - - - 1 are installed the same Flaslink 2mm Nut way as the Aileron - - 1 - - - - - - - 1 before (see page 6).
  • Page 15 PERCIVAL P-56 PROVOST Item code: BH164 Secure Secure Fuselage top side Flaslink Tail gear pushrod Flaslink servo arm Pushrod wire...
  • Page 16 PERCIVAL P-56 PROVOST Item code: BH164 C/A Glue.

  • Page 17: Wing Attachment

    PERCIVAL P-56 PROVOST Item code: BH164 12. INSTALLING THE SWITCH, RECEIVER AND BATTERY 4) Wrap the receiver and battery pack in the protective 1) Cut out the switch hole using a modeling knife. Use a foam to protect them from vibration. Use a rubber band 2mm drill bit and drill out the two mounting holes or masking tape to hold the foam in place.
  • Page 18 PERCIVAL P-56 PROVOST Item code: BH164 Insert the wing panel as pictures below. Screw the wing panel in position. Secure Secure Repeat the procedure for the other wing half. 14. INSTALLING COCKPIT FUSELAGE Position the canopy so the rear frame on the canopy is aligned with the rear edge of the cockpit opening.
  • Page 19 PERCIVAL P-56 PROVOST Item code: BH164 Adhesive tape. 15. INSTALLING THE SPINNER, PROPELLER - - - - - - 2 Secure...

  • Page 20: Control Throws

    PERCIVAL P-56 PROVOST Item code: BH164 BALANCING CONTROL THROWS 1) It is critical that your airplane be balanced correctly. 1) We highly recommend setting up a plane using the Improper balance will cause your plane to lose control control throws listed.
  • Page 21 I/C FLINGT WARNINGS Always operate in open areas, away from NEVER fly near power lines,aerials or ALWAYS adjust the engine from behind factories, hospitals, schools, buildings the propeller, and do not allow any part of other dangerous areas including airports, and houses etc.

Table of Contents