3. Web Control
®
3.2 Crestron e-Control
(continued)
NOTE
22) is set to
• If Crestron e-Control
®
in the Network Settings (
Disable, Crestron e-Control
®
cannot be used to operate the projector. Enable
Crestron e-Control
and close the web browser. Next, restart the web browser,
®
followed by entering the projector's IP address.
• Only English is supported on Crestron e-Control
®
.
• If the connection is terminated, the "Loading..." screen will appear. Check the
connection between the projector and the computer, then return or refresh the
Web page.
44